Nuvi 765T Part 3

[zamad]

Welcome to mfm bro omDidit. Glad to know that you're familiarising with the forum.

[silverbeauty]

Did you try a different USB cable ?
Is the USB cable connected direct from Nuvi to Lappy/PC or via USB Hub ? If so remove hub and connect direct.

[bahathir]

If you want the custom POIs appear in navigation mode, use the MYSG v2.10 (2.11 PouchX), and with the latest MFM map (1.66 and better).

Before you reflash it to other sw version, did your computer detected it as a mass storage previously? If you are using vista, sometimes you need to enable or install a driver before you can use the USB mass storage. Then try to use other OS, such as Mac OSX or XP or GNU/Linux. Sometime, XP/Vista is quite stupid when assigning drive letter to mass storage, especially you have several network drives.

After you successfully flashing your nuvi, don't forget to use 'Webupdater' to update your current nuvi, if any.

TQ

[waxxy]

i just updated to the recent map and add in topo but it is not showing the topo.

can garmin 765 show topo at the moment? I am using TWN 2.8 liao.

[dvpro]

i just updated to the recent map and add in topo but it is not showing the topo.

can garmin 765 show topo at the moment? I am using TWN 2.8 liao.

Pls check these out:
viewtopic.php?p=53020#p53020
viewtopic.php?p=54021#p54021

[omDidit]

If you want the custom POIs appear in navigation mode, use the MYSG v2.10 (2.11 PouchX), and with the latest MFM map (1.66 and better).

Before you reflash it to other sw version, did your computer detected it as a mass storage previously? If you are using vista, sometimes you need to enable or install a driver before you can use the USB mass storage. Then try to use other OS, such as Mac OSX or XP or GNU/Linux. Sometime, XP/Vista is quite stupid when assigning drive letter to mass storage, especially you have several network drives.

After you successfully flashing your nuvi, don't forget to use 'Webupdater' to update your current nuvi, if any.

TQ

bro, any clue how to workaround this using TWN firmware?


oh ya.. i just found out that i put gmapsupp.img on internal memory and another gmapsupp.img (different map) on SD card, they both appears on map selection anyone can confirm the same?

[dvpro]

oh ya.. i just found out that i put gmapsupp.img on internal memory and another gmapsupp.img (different map) on SD card, they both appears on map selection anyone can confirm the same?

Nuvis can support 2 supplementary maps (GMAPSUPP.IMG), one in device, and another one in data card.

[jontan67]

Just got myself a 765 from the PC fair..... yup.... I installed the MFM map on the SD card and I can switch between the maps. Somehow I am more comfortable wif MFM maps.....keep it up!!

[bahathir]

Just read this thread in gpspassion
http://www.gpspassion.com/forumsen/topi ... _ID=129016

I think most of the 7x5TWN sotware with v2.70 and v2.80 will noticed that the 'Time of arrival' is quite 'off' almost by double. But, based on the 765TWN sw Changelog,

http://www.garmin.com.tw/products/Nuvi7 ... wnload.htm

版本由2.60到2.70：

* 與Nuvi 765英文版機種v3.60同步修訂
* 改善3D複雜出口示意圖顯示的穩定性
* 加強高速道路出口指示中的道路圖標顯示
* 修正門牌搜尋功能的正確性
* 改善導航中「預估到達時間」顯示的準確性 Google translate: To improve the navigation of "estimated time of arrival" shows the accuracy of
* 更新GPS SW版本至2.90版。

It seem that the ETA improvement is not that accurate. I think the estimation is good if you live in country with heavy traffics, but here in our country,... So what you all think about it?

Thank you.

[sosi]

Bros, do you have Pycckuu__Katerina.vpm (006-D1312-00) TTS voice? I use 2.81 TWN on my 765T, but it doesn't work well with non-TTS voices
Also I've wrote alittle JS to download files from Garmin WebUpdate site, but (despite of lines in GarminDevice.xlm) WebUpdater doesn't know Part Number 006-D1312-00...