hi masters,
need help, i think i bricked my 205w. i followed lokoko suggestion and I flashed 465t v3.20 firmware to my 205w. it was succesful and i got first boot. then i reconnected back to PC and updated to v3.60 using the .gcd file from garmin. successfully updated again. reconnected it to my pc and restored the GPX folder. after disconnecting the device from my PC, it cannot boot anymore (like no power at all). now i cannot even boot it or even charge it, nothing is happening. can i still recover my 205w? tried reflashing again, but since it is not powering up, pc cannot detect it. please help!!!
btw, my 205w is S4 US version (ID - 827).
Converting Nuvi 2x5W Firmware to MAL/SIN Firmware
Moderators: Moderators, Regional Mappers
Forum rules
1. Be nice to each other and respect the moderators. Post in normal font size, color and weight. Follow Nettiquette
2. NO out of topic. Discuss about GPS software only
3. NO abuse, profanity and insults
4. NO spamming, cross posting and opening of duplicate topics
5. NO advertisement post or link
6. NO post/link to warez, cracks, serials or illegally obtained copyrighted content
7. Each message posted is owned by and is the opinion of the original poster. Neither mfm nor its owner or moderators are legally responsible for anything posted on the forum
1. Be nice to each other and respect the moderators. Post in normal font size, color and weight. Follow Nettiquette
2. NO out of topic. Discuss about GPS software only
3. NO abuse, profanity and insults
4. NO spamming, cross posting and opening of duplicate topics
5. NO advertisement post or link
6. NO post/link to warez, cracks, serials or illegally obtained copyrighted content
7. Each message posted is owned by and is the opinion of the original poster. Neither mfm nor its owner or moderators are legally responsible for anything posted on the forum
-
- Posts: 75
- Joined: Sun May 09, 2010 3:22 pm
Re: Converting Nuvi 2x5W Firmware to MAL/SIN Firmware
baldun wrote:hi masters,
need help, i think i bricked my 205w. i followed lokoko suggestion and I flashed 465t v3.20 firmware to my 205w. it was succesful and i got first boot. then i reconnected back to PC and updated to v3.60 using the .gcd file from garmin. successfully updated again. reconnected it to my pc and restored the GPX folder. after disconnecting the device from my PC, it cannot boot anymore (like no power at all). now i cannot even boot it or even charge it, nothing is happening. can i still recover my 205w? tried reflashing again, but since it is not powering up, pc cannot detect it. please help!!!
btw, my 205w is S4 US version (ID - 827).
Sorry for hear that, it's brick already, I think, no power on, nothing can help.
Re: Converting Nuvi 2x5W Firmware to MAL/SIN Firmware
no chance at all to recover my 205w? tia
-
- Posts: 75
- Joined: Sun May 09, 2010 3:22 pm
Re: Converting Nuvi 2x5W Firmware to MAL/SIN Firmware
baldun wrote:no chance at all to recover my 205w? tia
Got 1 chance,
Send back to Garmin Taiwan for Repair, but repairing cost + freight cost= almost can buy new.
Otherwise
Garmin GPS Junkyard Store
see viewtopic.php?f=29&t=454,
somebody looking for the Nuvi 2x5W "the LCD Screen, complete with the digitizer"
-
- Posts: 359
- Joined: Fri Sep 19, 2008 4:40 pm
Re: Converting Nuvi 2x5W Firmware to MAL/SIN Firmware
anyone manage successful convert 1091 ID S4 board?
Re: Converting Nuvi 2x5W Firmware to MAL/SIN Firmware
Hi All Sifu,
I have 255W SW Ver 7.40 S4_R3 V5 2GB Hw ID 006-B1091-00
is anyone able to update to Mal/Sin firmware out there ?
Please help.
thanks
I have 255W SW Ver 7.40 S4_R3 V5 2GB Hw ID 006-B1091-00
is anyone able to update to Mal/Sin firmware out there ?
Please help.
thanks
-
- Posts: 359
- Joined: Fri Sep 19, 2008 4:40 pm
Re: Converting Nuvi 2x5W Firmware to MAL/SIN Firmware
erickhor wrote:Hi All Sifu,
I have 255W SW Ver 7.40 S4_R3 V5 2GB Hw ID 006-B1091-00
is anyone able to update to Mal/Sin firmware out there ?
Please help.
thanks
ur ID is 1091, currently no hack available yet...
Re: Converting Nuvi 2x5W Firmware to MAL/SIN Firmware
hi all dvpro , bro and sifu
i have spending about few week for reading this thread ( 52 pages ) and other refer,
and more i read more i am confused , and afraid of "brick" my units , and some info may not be update anymore...
kindly provide the link and guide which more suitable for me , see below , thank all.
WANT : convert my below two USA garmin 205W to MAL/SIN firmware , to ENABLE Junction view and TTS ( speaking the street name ) , Lane assist.
First Unit Spec :
--Garmin 205W , S2 Board , hwid 0827 , version 7.4 ( latest )
Second Unit Spec (wife unit) :
--Garmin 205W , S4 board , hwid B0827 , version 2.9
QUESTION FOR above both units:
--which is the stable , tested and best version mal/sin firmware for it ( need not latest one ) ?
--look like S4 board , is not able to flash it ?
--lokoko , did mention 3.1 version is not so stable , advise to flash nuvi 645 version ?
--is this or any version support CHINESE input method ? like chinese handwriting
i have spending about few week for reading this thread ( 52 pages ) and other refer,
and more i read more i am confused , and afraid of "brick" my units , and some info may not be update anymore...
kindly provide the link and guide which more suitable for me , see below , thank all.
WANT : convert my below two USA garmin 205W to MAL/SIN firmware , to ENABLE Junction view and TTS ( speaking the street name ) , Lane assist.
First Unit Spec :
--Garmin 205W , S2 Board , hwid 0827 , version 7.4 ( latest )
Second Unit Spec (wife unit) :
--Garmin 205W , S4 board , hwid B0827 , version 2.9
QUESTION FOR above both units:
--which is the stable , tested and best version mal/sin firmware for it ( need not latest one ) ?
--look like S4 board , is not able to flash it ?
--lokoko , did mention 3.1 version is not so stable , advise to flash nuvi 645 version ?
--is this or any version support CHINESE input method ? like chinese handwriting
Re: Converting Nuvi 2x5W Firmware to MAL/SIN Firmware
Is USA garmin 205w S4 hwid0827 allowed to flash with mal sg firmware
By using
255w S4 firmware tool (called cocktail or patched firmware by sifu dypro) ?
By using
255w S4 firmware tool (called cocktail or patched firmware by sifu dypro) ?
-
- Posts: 3
- Joined: Wed Oct 05, 2011 10:00 am
Re: Converting Nuvi 2x5W Firmware to MAL/SIN Firmware
After reading all pages, i became from blur haha!
Anyone from singapore willing to help me out on my Nuvi 255W? The weird thing is i don't know its a local set or a US set, i highly suspect its a US set as i dont have the malaysia/singapore NT map. I bought the set in Singapore from the authorised retailer when 255W was first launch.
Anyway, anyone willing to help me flash my set so i can get JV? willing to pay a small fee or a coffee for your time too. PM me if interested k. Thanks!
Anyone from singapore willing to help me out on my Nuvi 255W? The weird thing is i don't know its a local set or a US set, i highly suspect its a US set as i dont have the malaysia/singapore NT map. I bought the set in Singapore from the authorised retailer when 255W was first launch.
Anyway, anyone willing to help me flash my set so i can get JV? willing to pay a small fee or a coffee for your time too. PM me if interested k. Thanks!
Return to “GPS Software & Apps”
Who is online
Users browsing this forum: No registered users and 21 guests