Page 1 of 9

GARMIN Mobile™ 10 軟體更新版本 5.00.30w( 僅適用於WM)

Posted: Tue Mar 17, 2009 6:00 pm
by thsalbert
GARMIN Mobile™ 10 軟體更新版本 5.00.30w( 僅適用於WM)
Download here: http://www.garmin.com.tw/products/Garmi ... nload.html

版本由5.00.10w到5.00.30w, 最新的軟體發行日期是03/17/09
1.改善部分頁面文字/圖示顯示問題
2.修正景點書無法讀取問題
3.改善語音提示
4.修正軟體鍵盤圖示於Pocket PC 2003顯示問題
5.改善里程表圖示在WVGA解析度橫式螢幕時顯示問題
6.改善導航時穩定性

GMXT Taiwan version was using the font within GMXT. It support Tradintional Chinese, Simplified Chines, English and Thai. More important is that it solves the location error for China official map during navigation in China with the latest V7.01 QSI version China map.
For Chinese you need Chinese.ttf and for Thai you need Thai.ttf and must be located in SD card\Garmin\font folder. Text input was using the WM PDA system input to enter text for searching POIs etc..
When you facing "Please re-insert SD Card" nagging, then you move this gmsup from SD card\Garmin\Apps folder into Device\Garmin folder. On my Samsung i900, I moved sw.unl and gmsup into device\Garmin folder and it worked excellence for me.

GMSUP FOR Traditional Chinese
[COMMON]
LOCAL_VER=TAIWAN

GMSUP FOR Simplified Chinese, this also corrected the locational error in China official maps.
[COMMON]
LOCAL_VER=CHINA

GMSUP FOR Thai ( I had uploaded the Thai.ttf and gmsup for Thai on the post on 3 Apr 2009)
[COMMON]
LOCAL_VER=THAI

Used notepad to edit and saved as GMSUP without the txt file extension, else it will "Please re-insert SD card"

The detail installation was in my Post on 1 Feb 2005, Page 5.

I tested on my Samsung i900 Singapore set and Dopod 818pro for all versions, there all worked well. For Thai you need the two additional software:
1) PDAMobizThaiEnabled_v2.1.WM5.sa.cab
2) rasco Thai RKeyboard_p.ARM.CAB
Which can be downloaded from here:
http://res0.esnips.com/doc/e0408c34-547 ... hai-Enable.
With the Thai enable installed, you can surf the Thai web page and enter used Thai as input without any problem. In my Samung Omnia and Dopod 818 Pro installed Thai had no prpblem. I assumed other WM PDA should have no problem lah.

You can have other country voice as well. For eg I need Thai voice. Just to do a little twick: Renamed English_American_.vpm > ori_English_American_.vpm for backup. To used Thai voice then renamed Thai__.vpm > English_American_.vpm. To used Cantonese voice, renamed Canton__.vpm > English_American_.vpm. now when you selected English America in Tools > Setting > Audio > Voice: Amercan English then you have Thai voice or Cantonese voice. This version only one American English selection.

Chnese.ttf in the attached, Also this file was available in GMXT S60 version.

I myself was using DFU_HMD.TTF renamed to Chinese.ttf, which can support more language in GMXT. I just attached it on my post on 23 Mar 2009 in this topic.

Up to you to choose Chinese.ttf or DFU_HMD.TTF.


Refer to the pictures attached.

Re: GARMIN Mobile™ 10 軟體更新版本 5.00.30w( 僅適用於WM)

Posted: Tue Mar 17, 2009 9:01 pm
by tlchuan
How to install these one ? no installer like Garmin en. :ko:

Re: GARMIN Mobile™ 10 軟體更新版本 5.00.30w( 僅適用於WM)

Posted: Tue Mar 17, 2009 9:23 pm
by singawon
If i remember correctly, after extracting the file, copy and paste to the garmin folder replacing the existing... 8-)

Re: GARMIN Mobile™ 10 軟體更新版本 5.00.30w( 僅適用於WM)

Posted: Tue Mar 17, 2009 11:48 pm
by thsalbert
tlchuan wrote:How to install these one ? no installer like Garmin en. :ko:

1) Put your phone in USB mode, Run it and extract into a folder.
2) Copy the the whole content of this folder into you SD card root directory.
3) move sd card\Garmin\apps\gmsup into device Garmin folder.
4) Open folder 2557 and run autorun.exe, It will started to installed GMXT into your PDA.
Run GMXT as usual and enjoy.

Re: GARMIN Mobile™ 10 軟體更新版本 5.00.30w( 僅適用於WM)

Posted: Tue Mar 17, 2009 11:55 pm
by tlchuan
Thank brother for the info :tq:

Re: GARMIN Mobile™ 10 軟體更新版本 5.00.30w( 僅適用於WM)

Posted: Wed Mar 18, 2009 1:23 am
by pauchai
thsalbert wrote:1) Put your phone in USB mode, Run it and extract into a folder.
2) Copy the the whole content of this folder into you SD card.
3) move sd card\Garmin\apps\gmsup into device Garmin folder.
4) Open folder 2557 and run autorun.exe, It will started to installed GMXT into your PDA.
Run GMXT as usual and enjoy.

bro thsalbert,
I followed step by step as above, but the autorun program cannot run through, keep on asking to insert SD card.
I am upgrading from my current GMXT 5.00.20w (Eng version). Btw, I am using Samsung Omnia and my GMXT installed in "My Storage".

Pls help.. [-o<

Re: GARMIN Mobile™ 10 軟體更新版本 5.00.30w( 僅適用於WM)

Posted: Wed Mar 18, 2009 4:13 am
by pauchai
Finally got it installed. Huh...... the solution is ; copy the chinese.ttf into the sd/garmin/font/ folder.
The autorun program keep on asking to insert the sd card because the chinese.ttf file is not found.... ](*,)
:mrgreen: :mrgreen: :mrgreen:
Thanks bro thsalbert. :tq:

Re: GARMIN Mobile™ 10 軟體更新版本 5.00.30w( 僅適用於WM)

Posted: Wed Mar 18, 2009 4:46 am
by noramin
where to get this chinese.ttf??

Re: GARMIN Mobile™ 10 軟體更新版本 5.00.30w( 僅適用於WM)

Posted: Wed Mar 18, 2009 5:27 am
by noramin
On My Touch Diamond it always keep on asking to insert SD card.. i'm also done move sd card\Garmin\apps\gmsup into device Garmin folder.. but same result.. pls help me!!

Re: GARMIN Mobile™ 10 軟體更新版本 5.00.30w( 僅適用於WM)

Posted: Wed Mar 18, 2009 12:11 pm
by pauchai
noramin wrote:where to get this chinese.ttf??

Ohhh..... I found it in one of the older version of TWN GMXT , version 4.xx :mrgreen: