How to play video and music files on your Papago R5800
Posted: Sat Jul 11, 2009 4:11 am
By default, Papago R5800 is a navigation-only device. Since it runs on WinCE 6.0, if Papago R5800 owners are able to exit the Papago X3 program back to WinCE, the R5800 becomes a mobile computer.
Below are some simple steps on how to make your R5800 play video and music files. Try this at your own risk!
Note: As long as you don't change any control panel setting and delete any files, your R5800 should be fine
Below are some simple steps on how to make your R5800 play video and music files. Try this at your own risk!
- Copy your video/music files into a blank SD card
- Create papago.ini and copy into the SD card. Papago.ini can be a blank file with no content.
- Place SD card into R5800's SD card slot
- Press the reset button with a pen
- After reset, R5800 will start with WinCE
- Use Windows Media Player to play your video/music files
Note: As long as you don't change any control panel setting and delete any files, your R5800 should be fine