MFM Papago map feedback

[Logos]

JV error. When exiting TPE southwards towards Tampines Rd, the JV pic arrow shows go straight when it should be pointing to the left lane.

[Logos]

There is no U-turn at N1 20.757 E103 53.452

[netrider]

I guess the U-turn has some major problem.
It's simple to test. From home, set your destination to home and drive out.
You'll be guided to do a U-turn on every junction!

[Logos]

There is an important legit U-turn not shown in the map at

103 deg 53' 12.5" E and 1 deg 21' 7.6" N

It is important as it's often used because of nearby school ...and by me

Right-turn is not possible now at 103 deg 53' 9.1" E and 1 deg 21' 6.7" N.

These corrections apply to the MFM Garmin map as well.

[zamad]

Both the Exits at 511 have identical names. They are actually 511A (to Sunway) and 511B (to Puchong).

Will it be same for the opposite direction?

The interchange is called 511 Sunway. Exits 511B Sunway leads to Puchong, while Exits 511A leads to Sunway.

[keong8260]

N6 14.188 E100 37.799
N6 08.333 E100 38.404

Both is roundabout, "she" tell me to turn left and then turn right; no roundabout voice prompt.

[keong8260]

N5 36.465 E100 38.385 ===> Tell me to head straight while planned route is heading left (very common error happen on many junction, just not much chance to snap picture).
N6 04.946 E100 21.778 ===> Error in Lane Assist, should "direct" me to turn right instead of head straight, voice prompt is correct .

[Chuah]

JV error. When exiting TPE southwards towards Tampines Rd, the JV pic arrow shows go straight when it should be pointing to the left lane.

Brother
Please provide coordinate or screen shot.

[Logos]

JV error. When exiting TPE southwards towards Tampines Rd, the JV pic arrow shows go straight when it should be pointing to the left lane.

Brother
Please provide coordinate or screen shot.

N1 21.987 E103 54.416

Can't take screenshot with my Holux62.

Strange....just tried to stimulate the route but JV didnt show up at above junction. However, it does show there is a similar JV view problem at N1 22.766 E103 55.262 Exit 6 TPE - route shows exit left, JV arrow shows "go straight". Do a stimulation to see this.

Edit: just updated to 070709 map, and I see this JV problem has been fixed.

[johnTan]

JV error. When exiting TPE southwards towards Tampines Rd, the JV pic arrow shows go straight when it should be pointing to the left lane.

Brother
Please provide coordinate or screen shot.

N1 21.987 E103 54.416

Can't take screenshot with my Holux62.

Strange....just tried to stimulate the route but JV didnt show up at above junction. However, it does show there is a similar JV view problem at N1 22.766 E103 55.262 Exit 6 TPE - route shows exit left, JV arrow shows "go straight". Do a stimulation to see this.

Edit: just updated to 070709 map, and I see this JV problem has been fixed.

Just tried simulation, already fixed, but if route go straight, no JCV will showed, is it ?