Page 1 of 1

Help needed: Holux NAV-62F, Papago X3 need latest maps

Posted: Sun Aug 24, 2014 1:30 am
by kkloh
Help needed.

I am trying to use my GPS set Holux NAV-62F.

It runs on Papago X3 and my maps installed in the system are currently
1. MFM PPG version 5-7-11
2. Navigasi.net v2.06
3. *SLA Singapore 110931 TMC

As it is already sometime back since I use this set, can any advise me how to
1. Upgrade the software?
2. Download the latest map?

I tried going to eastgear website but its seems not working any more and they do not support Papago maps anymore.

Thanks!

Re: Help needed: Holux NAV-62F, Papago X3 need latest maps

Posted: Sun Aug 24, 2014 9:56 pm
by moeyhc
We have stopped offering X3 maps long ago. You have to upgrade you navigation to X8.5 or higher to enjoy the free maps HERE.

Note: Upgrading to X8.5 is free from Papago.

Hope this helps... Cheers!

Re: Help needed: Holux NAV-62F, Papago X3 need latest maps

Posted: Tue Aug 26, 2014 12:40 pm
by kkloh
Thanks for your response.
It is show on the website that it supports

Holux Models
N62, N62E

How about N62F? Will installing X8.5 cause any problems?

Re: Help needed: Holux NAV-62F, Papago X3 need latest maps

Posted: Tue Aug 26, 2014 2:22 pm
by moeyhc
If your unit can run x3 it should run x8.5 without any problems.... Known problem with older GPS units is the 3D display and map refresh rate can be slow if the RAM is <128Kb.

Re: Help needed: Holux NAV-62F, Papago X3 need latest maps

Posted: Tue Aug 26, 2014 4:04 pm
by kkloh
That's good!
But I have lots of trouble to get access to the X8.5 software.

Register to
http://support.m3gps.com/index.php

Prompted I have not register my device.
So I tried keying my old holux GPS unit serial no. ME924HX1xxxx.
Then it logs me out from the website.

Looks like nothing can be done.

Re: Help needed: Holux NAV-62F, Papago X3 need latest maps

Posted: Wed Aug 27, 2014 5:32 pm
by moeyhc
Sorry to hear that... You can try calling M3gps to find out how to send it back for the free upgrade.

Re: Help needed: Holux NAV-62F, Papago X3 need latest maps

Posted: Fri Nov 14, 2014 4:33 pm
by m3support
kkloh wrote:Help needed.

I am trying to use my GPS set Holux NAV-62F.

It runs on Papago X3 and my maps installed in the system are currently
1. MFM PPG version 5-7-11
2. Navigasi.net v2.06
3. *SLA Singapore 110931 TMC

As it is already sometime back since I use this set, can any advise me how to
1. Upgrade the software?
2. Download the latest map?

I tried going to eastgear website but its seems not working any more and they do not support Papago maps anymore.

Thanks!


Hi kkloh,

Sorry for the late reply. The answer is yes but you need send over your device to us and it will take about 7 working days to make it done.

Re: Help needed: Holux NAV-62F, Papago X3 need latest maps

Posted: Sun Aug 16, 2015 3:46 pm
by jokefong
Hi

I am in same situation. Any advice to fix it ?