My ASEAN Free GPS Map Project

Hi members,

Please post here roads that require lane assist and the lane assist info itself. For guidance, we use junction view pictures for highway exits and ramps. Lane assist is used for turn left/right kind of situation on major roads.

Lane assist code:


Give the coordinate:
N3.07471 E101.61338

Then the lane info from left to right:
832 (left lane turns left, centre lane straight & right, right lane turns right)

Implemented lane assist locations:

i think we need 2 more sign.

For example, this location will need :

split left, split left, split right, split right

N 1°16'44.33" E 103°49'17.16"

One question:
The coordinate that we supplied, should it be the point where the road split or the point where the Lane assist supposed to appear ? In this case the last exit is quite close to the point where the road splits.

The coordinate i gave was the point where the picture should appear.

barney wrote:i think we need 2 more sign.

Please refer to post#1, use only those turn features which are support only.

We use JV for highway exit, lane assist is use on major road with 3 lanes & above.

OngCC wrote:

barney wrote:i think we need 2 more sign.

Please refer to post#1, use only those turn features which are support only.

We use JV for highway exit, lane assist is use on major road with 3 lanes & above.

Can we use code a?

The following tricky locations can do with lane assist:

N1 19.458 E103 58.404
966 <-- should be 911, right?

N1 19.578 E103 58.138
911



Done! - OngCC

N6 04.931 E100 21.780
8112

N6 04.927 E100 21.770
81126 <-- 8112

N6 04.946 E100 21.758
81326 <-- 8132

N6 04.946 E100 21.778
81126 <-- 8112

for the road with right turn together with u-turn, I using code 26. Is that OK?

Like this one OK?

Done! - OngCC