Papago X5 for Android

[JayCee]

I have samsung galaxy mini GT-S5570. on papagox5 I that troubled when see map display. when enter map display must be cannot back to menu papago. my meaning no choice to go to destinations, back or whatever. that there is only display maps.everbody that skilled shared your knowledge please....

Well, I would suggest you please first check if you can see a sturdy satellite symbol (without the "?") on the top-right corner of the display. If the top-right corner comes up with a satellite symbol with "?", this means the GPS satellite locking has not been completed. As a result, you can only work with the map and no NAVI function is possible.

--JC

[feiso]

I have samsung galaxy mini GT-S5570. on papagox5 I that troubled when see map display. when enter map display must be cannot back to menu papago. my meaning no choice to go to destinations, back or whatever. that there is only display maps.everbody that skilled shared your knowledge please....

Well, I would suggest you please first check if you can see a sturdy satellite symbol (without the "?") on the top-right corner of the display. If the top-right corner comes up with a satellite symbol with "?", this means the GPS satellite locking has not been completed. As a result, you can only work with the map and no NAVI function is possible.

--JC

strong satellite symbol. function to navi also worked well. but when I find something destination in poi search. my example find nearest bank. when I click in destination that sought map show that bank location. but only map only. there is no any choice in screen for me make any choice of whether for me revert to my location or go to destination that in find

[JayCee]

I have samsung galaxy mini GT-S5570. on papagox5 I that troubled when see map display. when enter map display must be cannot back to menu papago. my meaning no choice to go to destinations, back or whatever. that there is only display maps.everbody that skilled shared your knowledge please....

Well, I would suggest you please first check if you can see a sturdy satellite symbol (without the "?") on the top-right corner of the display. If the top-right corner comes up with a satellite symbol with "?", this means the GPS satellite locking has not been completed. As a result, you can only work with the map and no NAVI function is possible.

--JC

strong satellite symbol. function to navi also worked well. but when I find something destination in poi search. my example find nearest bank. when I click in destination that sought map show that bank location. but only map only. there is no any choice in screen for me make any choice of whether for me revert to my location or go to destination that in find

Normally pressing "back" button (right-bottom of phone) will bring you back to previous screen/display.
Keep pressing the "back" button will bring you back further, is this what you are looking for?

--JC

[ultrafire88]

Brother ultrafire88,

Have replaced the dead BL-4C battery which is costly as it is an old model.


--JC

If u had mentioned earlier tt yr Bluetooth receiver uses BL4C, i would hv adviced u to buy the BL5C instead. It is very slightly thicker but shd fit just fine. I know bec my holux is supposed to take BL4C too but i use the BL5C instead. The 5C is higher capacity (1020 mAh vs i think 850/900 mAh for 4C) and is about 50% cheaper! In singapore, 5C is S$19 while 4C is S$29!

Something to bear in mind if u later decide to get a spare.


Ultrafire88

[JayCee]

Brother ultrafire88,

Have replaced the dead BL-4C battery which is costly as it is an old model.


--JC

If u had mentioned earlier tt yr Bluetooth receiver uses BL4C, i would hv adviced u to buy the BL5C instead. It is very slightly thicker but shd fit just fine. I know bec my holux is supposed to take BL4C too but i use the BL5C instead. The 5C is higher capacity (1020 mAh vs i think 850/900 mAh for 4C) and is about 50% cheaper! In singapore, 5C is S$19 while 4C is S$29!

Something to bear in mind if u later decide to get a spare.


Ultrafire88

I tried to beat the time for the battery, so went to SLS level 1 for it yesterday.
There were very few shops stocking BL-4C and BL-5C - be it original or compatible.
This is because these batteries are already on the way to be phasing out.
Indeed, the major difference of Original BL-4C and 5C is the capacity: 890 vs 1020 mAh.
Original Nokia BL4C and 5C are damn expensive (all quoted S$30+).
So I know I have to look for compatible ones.
One shop has quoted me a nicely sealed packing of compatible BL-4C or 5C same price at S$20.
I know original BL-5C is able to fit into Qstarz BT-Q1000 but I am skeptical to take the compatible BL-5C because you never know whether it is up to the exact specification of the original (size???). Since the device is taking BL-4C, the shop keeper is KIND (hahaha) enough to offer the compatible BL-4C to be fitted into the device else no deal. But he will not take back the BL-5C (once packing opened) if I insisted to try and turned out that the BL-5C is not able to fit into the device.
So, have no choice but took the BL4C.......

p.s. Look before you buy besides price:
- I have seen compatible BL-5C battery capacity specification ranging from 800 -1100 mAh.

[ultrafire88]

Brother ultrafire88,

Have replaced the dead BL-4C battery which is costly as it is an old model.


--JC

If u had mentioned earlier tt yr Bluetooth receiver uses BL4C, i would hv adviced u to buy the BL5C instead. It is very slightly thicker but shd fit just fine. I know bec my holux is supposed to take BL4C too but i use the BL5C instead. The 5C is higher capacity (1020 mAh vs i think 850/900 mAh for 4C) and is about 50% cheaper! In singapore, 5C is S$19 while 4C is S$29!

Something to bear in mind if u later decide to get a spare.


Ultrafire88

I tried to beat the time for the battery, so went to SLS level 1 for it yesterday.
There were very few shops stocking BL-4C and BL-5C - be it original or compatible.
This is because these batteries are already on the way to be phasing out.
Indeed, the major difference of Original BL-4C and 5C is the capacity: 890 vs 1020 mAh.
Original Nokia BL4C and 5C are damn expensive (all quoted S$30+).
So I know I have to look for compatible ones.
One shop has quoted me a nicely sealed packing of compatible BL-4C or 5C same price at S$20.
I know original BL-5C is able to fit into Qstarz BT-Q1000 but I am skeptical to take the compatible BL-5C because you never know whether it is up to the exact specification of the original (size???). Since the device is taking BL-4C, the shop keeper is KIND (hahaha) enough to offer the compatible BL-4C to be fitted into the device else no deal. But he will not take back the BL-5C (once packing opened) if I insisted to try and turned out that the BL-5C is not able to fit into the device.
So, have no choice but took the BL4C.......

p.s. Look before you buy besides price:
- I have seen compatible BL-5C battery capacity specification ranging from 800 -1100 mAh.

Oh, if u r in singapore, then no prob. Just go to mustafa - the original Nokia BL5C is 1020 mAh n only $19 - just bgt one for my holux 2 weeks ago.

If the 5C can fit into yr QStar, i GUARANTEE it will work. The difference in thickness is minute - only 1-2mm at most. If u can squeeze in a thin double-folded piece of paper, u can fit the 5 C.

Dun worry about compatibility - all the batteries are LiIon or LiPolymer n provide the same voltage output which is what u hv to be concerned about.

There r still some current Nokia models using the 5C like the 5130 Xpress Music so i think it wont be phased out so soon. For 4C, i cant think of any current model although the older 6120 is still popular

[feiso]

Normally pressing "back" button (right-bottom of phone) will bring you back to previous screen/display.
Keep pressing the "back" button will bring you back further, is this what you are looking for?

--JC[/quote]

the problem display back not in the map display..so i have to out application papago and open back application papago to navi.

[JayCee]

Normally pressing "back" button (right-bottom of phone) will bring you back to previous screen/display.
Keep pressing the "back" button will bring you back further, is this what you are looking for?

--JC

the problem display back not in the map display..so i have to out application papago and open back application papago to navi.

Papago X5 should start up in NAVI view (mode).
Press "Menu" and select "Map View "will bring you to map view.
At bottom right of the "map view", you should find "Back" button with an arrow symbol.
(Not the one at the bottom-right of phone)
Can you see this "back" button?
Press this button will bring you to previous page and you should see "NAVI" at the bottom of the display.
Press "NAVI" will bring you to the Navi mode.

By the way, where you get your Papago X5 software?
What version is the engine?
what map version you are using?

--JC

[feiso]

Normally pressing "back" button (right-bottom of phone) will bring you back to previous screen/display.
Keep pressing the "back" button will bring you back further, is this what you are looking for?

--JC

the problem display back not in the map display..so i have to out application papago and open back application papago to navi.

Papago X5 should start up in NAVI view (mode).
Press "Menu" and select "Map View "will bring you to map view.
At bottom right of the "map view", you should find "Back" button with an arrow symbol.
(Not the one at the bottom-right of phone)
Can you see this "back" button?
Press this button will bring you to previous page and you should see "NAVI" at the bottom of the display.
Press "NAVI" will bring you to the Navi mode.

By the way, where you get your Papago X5 software?
What version is the engine?
what map version you are using?

--JC

you correct. start papago in navi mode. from beginning display certainly there is menu choice. when I choose "map view" bring me to map view. but after I inside map view no choice "back" or arrow symbol in that map display. so I could not return to page before him.
I have had from phone shop. from start buy reach now possess problem that same. although I already update. I install that new also the problem still same. I used papago X5.1 build Aug 6 2010.
map's version:MFM PPG Version 3-4-11

[vikmel99]

Any one can provide guide line to install papago x5 in Galaxy Tab?

I had installed it but it force close before goto Papago X5 menu.