How to play video and music files on your Papago R5800

[antyong (retired)]

By default, Papago R5800 is a navigation-only device. Since it runs on WinCE 6.0, if Papago R5800 owners are able to exit the Papago X3 program back to WinCE, the R5800 becomes a mobile computer.

Below are some simple steps on how to make your R5800 play video and music files. Try this at your own risk!

1. Copy your video/music files into a blank SD card
2. Create papago.ini and copy into the SD card. Papago.ini can be a blank file with no content.
3. Place SD card into R5800's SD card slot
4. Press the reset button with a pen
5. After reset, R5800 will start with WinCE
6. Use Windows Media Player to play your video/music files

Note: As long as you don't change any control panel setting and delete any files, your R5800 should be fine

[zamad]

Thanks for the tips. I've been reading on WinCE, especially on how to get a small button on the Navi screen to do screen captures. At the moment, not successful yet.

[johnTan]

Wow.. Thanks bro antyong for the guidance
Now my R5800 not only can play navigator,
but also can play game,music,movie,dictionary.....etc.
bro antyong.

[zamad]

With some assistance, I've got the WinCE running...

[johnTan]

With some assistance, I've got the WinCE running...

bro zamad,
Well done
Now you know how to capture the screen.

[exz8]

must have 2 sd card?

[zamad]

I've got the MP3's in the SD card. Papago Maps are in the HDD. Hence, I'm using only one SD card.

[exz8]

understood now...
have you found the capture screen zamad?

[zamad]

Still hunting for a good one.

[krill]

For the time being, I've no idea how to do a screen capture at all. Could someone share some tips? Oh yes before I forget, could someone point to any how-to on contributing route or POI using R5800?