GPS'ers must carry flashlight(s)

[uncle wong]

"World's Most Powerful Flashlight"
Wicked Laser ( The Torch ) ( 4100 Lumens )
Currently being reviewed by The Guinness Book of World Records, The Torch is the world's brightest and most powerful flashlight.
http://www.wickedlasers.com/lasers/The_Torch-74-41.html

[tuah]

Be extra careful with this flashlight especially when keep in pocket.

[drsec]

Be extra careful with this flashlight especially when keep in pocket.

Why? I suspect you are gonna say it will cause impotency.

Oops, just saw the website. This thing lights cigarettes and burns paper. It will burn a hole in your precious.

[moeyhc]

Sooner or later there will be a model with Liquid Cool.... !!!... These LEDs runs about 200 DegC without heatsink... Typical operating temperature is kept to 110 DegC. Good for campers.... you can boil water with it.... ... or keep warm on a cold night... Hug me flashlight, hug me quick, never let me go....

[nksc]

this is one hell of a torch

Be extra careful with this flashlight especially when keep in pocket.

Why? I suspect you are gonna say it will cause impotency.

Oops, just saw the website. This thing lights cigarettes and burns paper. It will burn a hole in your precious.

[cruiser]

I am glad to try out some possible applications for my Fenix headband, it arrived yesterday & flanked on either side with the PD30s on a cap.

Soon, the HP10 will arrive complimenting further but I'll see how that option will offer when it arrives in under 10 days I was assured by the Vendor. I think the HP 10 (225 lumens) is soon unavailable (if it is not already as there is a newer model now with lesser Lumens...:eek:)

Will also work on the AR102 pressure switch for the TK12 R5.

With my Cyborg baseball cap... outfitted with 3x PD 30s...and my guard dog with a the same or similar setup... we are like mobile lighthouses on the move...hahaaa!!!

Here's my TK40 on the side of the driving seat.



The Fenix AR102 Pressure switches for my TK12s





The Headband that is actually handy and ideal to have leaving yr hands free!!!




Here's my other cap that stays in the car when needed and outfitted with only one PD30.





It is now upgraded into this>>>>

[simseair]

Cool, Man. You are a walking lighthouse.

[uncle wong]

Xeno & FARKA Flashlight .
Contact Uncle Wong for more info
http://forum.lowyat.net/topic/1388660/+580

[uncle wong]

Xeno & FARKA Flashlight
Contact Uncle Wong for more info
http://forum.lowyat.net/topic/1388660/+580

[uncle wong]

Thrunite Catapult V2
The ThruNite Catapult V2 version has been designed to be a search & rescue and tactical flashlight without peer.

The new version has been improved in many ways compared to the previous Catapult.

We re-designed the new driver without a MCU, which allows it to accept higher input voltage and current in our search in improving the output. We made important changes in five ways:
1) We are using an IC with higher efficiency at the heart of our circuit. With higher efficiency, less heat is produced.
2) Eliminating the MCU allows our circuit to have a greater range of operating temperature. Now it will work when the outside temperature ranges from minus 30C to over 130C, making it perfect for tactical applications where reliability is a must.
3) Because of the high output of the light (and resulting heat generated by the LED), we added an automatic overheat shutdown function. When the circuit senses temperature in excess of 120C, it will automatically shut down. When the temperature has cooled to below 120C, it can be turned on again. This will prevent damage to the light and give it a longer working time.
4) We have selected premium quality 2oz brass PCBs to increase the heat dissipation ability. This allows the light to handle the heat easily, and reliably.
5) We eliminated the anodized layer between the LED and electronic housing. In our tests, after removing this layer, the heat transfer rate is increased 15 times. When the LED is working, this allows the heat to dissipate more effectively, especially important for LEDs under such high current, allowing for greater brightness and increasing the LED’s lifespan. We are continually seeking ways to improve our lights, and this was a great advancement.

The Catapult’s aluminium bezel has been replaced with a stainless steel on the Catapult V2. This allows for a much higher impact resistance, making it much more effective in tactical situations.

The Catapult V2’s ergonomic design enables it to be used for extended periods of time without fatigue. It provides an anti-slip surface and grip design to lessen any chance of dropping the light.

While many of our competitors use softer and more affordable 6061 aircraft aluminum, we craft our lights from the ultra-strong 7075 aircraft aluminum and coated with mil-spec hard anodizing, making the Catapult V2 extremely durable and well made. With its massive output from the state-of-the-art Luminus SST-50 LED, the Catapult V2 sets a new standard in LED flashlights for both pure output and throw.

The beam of the Catapult V2 has been fine tuned to offer maximum throw while still providing massive amounts of spill. Whether used for search and rescue, security operations, boating or any activity requiring tons of illumination, especially at a distance, the Catapult V2 is a fantastic choice.

The Catapult V2 is easy to use. It offers 2 levels of output: High and Low. To cycle through the modes, simply loosen the bezel for Low or tighten it for High.

Version 2 of the Catapult improves on the original by increasing output, simplifying user interface, adding a stainless steel bezel, and allowing for the use of both CR123 and lithium-ion batteries.

World-class super bright Luminus SST-50 emitter with the highest flux bin
Stainless steel bezel
Maximum of 1000 emitter lumens on high
Low Output: approx. 250 lumens
2 Levels of output
Operating voltage between 3.7V to 13V
Low = 900mA; High = 3.5A
Mil-Spec Type III Hard Anodizing
Constructed from 7075AL for superior durability.
Length: 185mm; Head diameter: 58mm; Body diameter: 31mm; Weight: 390g.
Tactical momentary-on forward click switch
IPX-8 Water/Dust Resistance
Tail cap design allows the light to tail stand
Shatter resistant ultra clear lens with double-sided multilayer AR coating
54mm textured orange peel reflector
BATTERY OPTIONS: 2 x 18650 / 2 x 17670 / 4 x CR123/ 2 x 18650. (2 x CR123/2 x 16340/1X17670/1x18650for low stage only)