MFM Papago map feedback

[bUGG]

Tech guy in Eastgear told me that the Holux and Z880 are using different firmware, and requested me to lodge the incident to Eastgear via Mypapago.com, and get them to investigate.

Ok, I will email them as well. Luckyly I still have the 090618 Beta. Antyong

[duke17]

Tech guy in Eastgear told me that the Holux and Z880 are using different firmware, and requested me to lodge the incident to Eastgear via Mypapago.com, and get them to investigate.

Ok, I will email them as well. Luckyly I still have the 090618 Beta. Antyong

Bro bUGG, Since you have the 090618 Beta., Why don't you just use it and replace the old data files with the new data files (JV and 3D buildings) of the current release.

[duke17]

I did a simulation of bUGG's routing problem and now confirm the error on the Z880 which we have.

However, if i select "Tool" and select "Alternative" route it will show the desired route in "Route III.

[bUGG]

Yes, if Alternative route, it will suggest the desired route, but until batu tiga toll, it will suggest to use the "shell batu tiga toll" way. Even I select the two point "X" to do the simulation, no other alternative routes suggested, no matter how, it will go through the shell road, I could have go straight instead on the federal highway. Bro Antyong, can you try on your Holux

[antyong (retired)]

ppg.jpg

Bro, I am quite satisfied with the routing of 090624 on my Holux. Also, both my Holux running Eastgear/X2 and R5800 running M3GPS/X3 are giving identical routing results.

I hope you can sort out your problem ASAP to enjoy accurate routing on Papago

[dvpro]

Guys, any idea how to create a route from a simulated position?

[antyong (retired)]

Go to Routing Options then Route Plan. You can enter start, destination and multiple via points.

[dvpro]

Go to Routing Options then Route Plan. You can enter start, destination and multiple via points.

Thanks Sifu.

[sengsiong]

Hi all,

I just want to feedback the MFM Papago junction maps which i encounter when I test it from traffic light near Jusco Bukit Indah(Johor Bahru) heading to Gelang Patah.

The junction view picture turn up promptly but the direction arrow always guide us to keep on right lane which is NOT correct.

Is there a BUG or something wrong with the maps I download?

Thanks.

[bUGG]

ppg.jpg

Bro, I am quite satisfied with the routing of 090624 on my Holux. Also, both my Holux running Eastgear/X2 and R5800 running M3GPS/X3 are giving identical routing results.

I hope you can sort out your problem ASAP to enjoy accurate routing on Papago

Yup... hope eastgear can solve the Z880 problem.