nüvi 205

[aceedburn]

New question here...

Is the nuvi205 junction view folder function? Since it will update every installation from garmin official website map. But for mfm just only the maps.

Is that mean i can delete the junction view folder in nuvi205?

bro, there is no junction view function with mfm maps yet....maybe in the future there will be...

[perpetual]

nuvi 205 don't have "callibration"

[dvpro]

nuvi 205 don't have "callibration"

It's in a hidden menu in Nuvi205. Turn off Nuvi. Turn on Nuvi and hold the power button (to the left) for about 30 secs until the calibration screen appears.

[zamad]

nuvi 205 don't have "callibration"

It's in a hidden menu in Nuvi205. Turn off Nuvi. Turn on Nuvi and hold the power button (to the left) for about 30 secs until the calibration screen appears.

You learn something new everyday.

[perpetual]

why garmin make this function hidden?
For make money? tell users that their garmin need to service?

anyway....
thanks for helping....

[ifse]

To check calibration (check only, not do the calibration), press the Battery icon at the top right of the main screen for about 8 seconds until you enter the diagnostic mode. Press the "Next" button to advance 4 screens (maybe more on some models) until you get to a black screen. Touch the screen with a stylus or finger. You should see a blue dot centered on where you touch. If it's not centered, then follow the procedure given by dvpro to calibrate. Often you'll be centered on only part of the screen (for example the top half but not the bottom half).

After you are done, tap "Next" until you return to the first diagnostic screen, then tap Exit to finish.

This is useful since MFM has so many POIs that you need to be precise to select the right one.

[kuongchin]

To check calibration (check only, not do the calibration), press the Battery icon at the top right of the main screen for about 8 seconds until you enter the diagnostic mode. Press the "Next" button to advance 4 screens (maybe more on some models) until you get to a black screen. Touch the screen with a stylus or finger. You should see a blue dot centered on where you touch. If it's not centered, then follow the procedure given by dvpro to calibrate. Often you'll be centered on only part of the screen (for example the top half but not the bottom half).

After you are done, tap "Next" until you return to the first diagnostic screen, then tap Exit to finish.

This is useful since MFM has so many POIs that you need to be precise to select the right one.

Hi bro, how to make sure i dont do the calibration? i've click the start test, is that mean calibration? and i've press almost all available button......will it be something wrong?

[aceedburn]

new firmware version 5.30 for nuvi 205. changelog as below :

Changes made from version 5.10 to 5.30:
Corrected an issue that could cause audio problems on phone calls longer than 5 minutes.
http://www8.garmin.com/support/download ... sp?id=4103

[exz8]

this version able to playback 1 sec tracking?

[aceedburn]

this version able to playback 1 sec tracking?

dunno, haven't tested yet, will test it this evening and report back here...