Still unable to do routing to Kelantan/Terengganu POIs from KL on Papago X2 Standard version.
It calculate until around 70%, then pop up error msg: Cannot route to 'Caltex Kuala Terengganu". ( No effective path from starting point to destination)
MFM Papago map feedback
Moderators: Moderators, Regional Mappers
Forum rules
NOTE: This forum should be used strictly for feedback of MFM-Papago map only. Issues with other software or devices will be re-directed.
NOTE: This forum should be used strictly for feedback of MFM-Papago map only. Issues with other software or devices will be re-directed.
Re: MFM Papago map feedback
Find out More Product and Services Here; http://www.skybees.com.my
- duke17
- Champion Polygon Mapper
- Posts: 1364
- Joined: Thu Mar 19, 2009 11:41 am
- Location: Singapore, JB.
Re: MFM Papago map feedback
This new map rocks!
More polygons are now visible especially house & building polygons, some appearing even in 3D. We have a more colourful map now. The lane assist ans JVs are much improved. Voice prompts are are also given a little earlier.
Bro antyong.





More polygons are now visible especially house & building polygons, some appearing even in 3D. We have a more colourful map now. The lane assist ans JVs are much improved. Voice prompts are are also given a little earlier.





Garmin Montana 650; Nuvi 2575RLM; BMW Navigator V; Nuvi 205; Garmin Edge 1000; mfm
Re: MFM Papago map feedback
I concur with bro duke17. The 090819 map is a big improvement over the previous version. The 3D building polygons really improves your orientation.
Feedback on 3D buildings: The ones that I've passed through are all the same height (approx 4 storey high?) on the PND, which are OK for normal office/shop lots. Apartments are normally 10+ storey high. Do we want to 'extrude' these buildings to (several) different heights?
Feedback on 3D buildings: The ones that I've passed through are all the same height (approx 4 storey high?) on the PND, which are OK for normal office/shop lots. Apartments are normally 10+ storey high. Do we want to 'extrude' these buildings to (several) different heights?
mfm : magnificent free maps
Garmin nüvi 2575RLM v2.80, Garmin 60CSx v4.00, Garmin nüvi 205W(patched), Papago R5800 X8.5, Qstarz Q1000P (Datalogger)
Retired: GMXT Palm T|X, nuvifone A10 v5.0.77, Garmin-Asus G60 v2.43, GPSlim236 (Datalogger)
Garmin nüvi 2575RLM v2.80, Garmin 60CSx v4.00, Garmin nüvi 205W(patched), Papago R5800 X8.5, Qstarz Q1000P (Datalogger)
Retired: GMXT Palm T|X, nuvifone A10 v5.0.77, Garmin-Asus G60 v2.43, GPSlim236 (Datalogger)
-
- Posts: 6
- Joined: Fri Jun 12, 2009 4:27 pm
- Location: Singapore
Re: MFM Papago map feedback
Hihi, right now the English TTS speaks out all the hidden codes for the elevated ramps and stuff, even though they don't show on the map (eg AYE ramp will be announced as "AYE ramp cap 1 cap 0"). Will this be corrected? Thanks.
- antyong (retired)
- Site Admin (retired)
- Posts: 1518
- Joined: Sun Sep 14, 2008 11:42 am
- Location: Acquiring satellites....
Re: MFM Papago map feedback
Whiz In Ache wrote:Hihi, right now the English TTS speaks out all the hidden codes for the elevated ramps and stuff, even though they don't show on the map (eg AYE ramp will be announced as "AYE ramp cap 1 cap 0"). Will this be corrected? Thanks.
What device and Papago version are you using? If it is from the official distributors, the problem will be fixed.
-
- Posts: 4
- Joined: Tue Apr 21, 2009 12:21 am
Re: MFM Papago map feedback
Hi....need to contribute some errors on perak maps here....the Jalan canning estate to big road Jalan Raja Di hilir cannot be turning right...because the road has been change to one way,only can turning left...pls update thanx 

Re: MFM Papago map feedback
hi skylinestan,
Would appreciate if you could give the coordinates of where this 'no right-turn' is, preferrably in gdb or gpx format. Look into our 'Library' on how to install/use Mapsource.
Cheers.
Would appreciate if you could give the coordinates of where this 'no right-turn' is, preferrably in gdb or gpx format. Look into our 'Library' on how to install/use Mapsource.
Cheers.
mfm : magnificent free maps
Garmin nüvi 2575RLM v2.80, Garmin 60CSx v4.00, Garmin nüvi 205W(patched), Papago R5800 X8.5, Qstarz Q1000P (Datalogger)
Retired: GMXT Palm T|X, nuvifone A10 v5.0.77, Garmin-Asus G60 v2.43, GPSlim236 (Datalogger)
Garmin nüvi 2575RLM v2.80, Garmin 60CSx v4.00, Garmin nüvi 205W(patched), Papago R5800 X8.5, Qstarz Q1000P (Datalogger)
Retired: GMXT Palm T|X, nuvifone A10 v5.0.77, Garmin-Asus G60 v2.43, GPSlim236 (Datalogger)
-
- Posts: 4
- Joined: Tue Apr 21, 2009 12:21 am
Re: MFM Papago map feedback
Hi zamad this is the place that need to change on the map for papago 

You do not have the required permissions to view the files attached to this post.
Re: MFM Papago map feedback
Like this?
You do not have the required permissions to view the files attached to this post.
mfm : magnificent free maps
Garmin nüvi 2575RLM v2.80, Garmin 60CSx v4.00, Garmin nüvi 205W(patched), Papago R5800 X8.5, Qstarz Q1000P (Datalogger)
Retired: GMXT Palm T|X, nuvifone A10 v5.0.77, Garmin-Asus G60 v2.43, GPSlim236 (Datalogger)
Garmin nüvi 2575RLM v2.80, Garmin 60CSx v4.00, Garmin nüvi 205W(patched), Papago R5800 X8.5, Qstarz Q1000P (Datalogger)
Retired: GMXT Palm T|X, nuvifone A10 v5.0.77, Garmin-Asus G60 v2.43, GPSlim236 (Datalogger)
-
- Posts: 6
- Joined: Fri Jun 12, 2009 4:27 pm
- Location: Singapore
Re: MFM Papago map feedback
antyong wrote:Whiz In Ache wrote:Hihi, right now the English TTS speaks out all the hidden codes for the elevated ramps and stuff, even though they don't show on the map (eg AYE ramp will be announced as "AYE ramp cap 1 cap 0"). Will this be corrected? Thanks.
What device and Papago version are you using? If it is from the official distributors, the problem will be fixed.
I'm using the Holux 62 from EG with X3. The last few maps from MFM also had this problem.....TIA
Return to “MFM-Papago map/software feedback”
Who is online
Users browsing this forum: No registered users and 7 guests