MFM Papago map feedback

Feedback for MFM-Papago map/software

Moderators: Moderators, Regional Mappers

Forum rules
NOTE: This forum should be used strictly for feedback of MFM-Papago map only. Issues with other software or devices will be re-directed.
liewss80
Posts: 40
Joined: Fri Sep 19, 2008 10:06 pm
Location: Papago X3 for R5800

Re: MFM Papago map feedback

Postby liewss80 » Wed Aug 12, 2009 9:15 am

Still unable to do routing to Kelantan/Terengganu POIs from KL on Papago X2 Standard version.

It calculate until around 70%, then pop up error msg: Cannot route to 'Caltex Kuala Terengganu". ( No effective path from starting point to destination)
Find out More Product and Services Here; http://www.skybees.com.my

User avatar
duke17
Champion Polygon Mapper
Champion Polygon Mapper
Posts: 1364
Joined: Thu Mar 19, 2009 11:41 am
Location: Singapore, JB.

Re: MFM Papago map feedback

Postby duke17 » Fri Aug 21, 2009 8:27 am

This new map rocks! =D> =D> =D> :thumbsup:
More polygons are now visible especially house & building polygons, some appearing even in 3D. We have a more colourful map now. The lane assist ans JVs are much improved. Voice prompts are are also given a little earlier. :good: :good: :tq: Bro antyong. :prayer: :peace:
Garmin Montana 650; Nuvi 2575RLM; BMW Navigator V; Nuvi 205; Garmin Edge 1000; mfm

User avatar
zamad
Valued Contributor
Posts: 2312
Joined: Sun Sep 21, 2008 12:50 am
Location: Shah Alam

Re: MFM Papago map feedback

Postby zamad » Fri Aug 21, 2009 6:31 pm

I concur with bro duke17. The 090819 map is a big improvement over the previous version. The 3D building polygons really improves your orientation.

Feedback on 3D buildings: The ones that I've passed through are all the same height (approx 4 storey high?) on the PND, which are OK for normal office/shop lots. Apartments are normally 10+ storey high. Do we want to 'extrude' these buildings to (several) different heights?
mfm : magnificent free maps
Garmin nüvi 2575RLM v2.80, Garmin 60CSx v4.00, Garmin nüvi 205W(patched), Papago R5800 X8.5, Qstarz Q1000P (Datalogger)
Retired: GMXT Palm T|X, nuvifone A10 v5.0.77, Garmin-Asus G60 v2.43, GPSlim236 (Datalogger)

Whiz In Ache
Posts: 6
Joined: Fri Jun 12, 2009 4:27 pm
Location: Singapore

Re: MFM Papago map feedback

Postby Whiz In Ache » Mon Aug 24, 2009 6:43 am

Hihi, right now the English TTS speaks out all the hidden codes for the elevated ramps and stuff, even though they don't show on the map (eg AYE ramp will be announced as "AYE ramp cap 1 cap 0"). Will this be corrected? Thanks.

User avatar
antyong (retired)
Site Admin (retired)
Posts: 1518
Joined: Sun Sep 14, 2008 11:42 am
Location: Acquiring satellites....

Re: MFM Papago map feedback

Postby antyong (retired) » Mon Aug 24, 2009 9:08 pm

Whiz In Ache wrote:Hihi, right now the English TTS speaks out all the hidden codes for the elevated ramps and stuff, even though they don't show on the map (eg AYE ramp will be announced as "AYE ramp cap 1 cap 0"). Will this be corrected? Thanks.

What device and Papago version are you using? If it is from the official distributors, the problem will be fixed.

skylinestan
Posts: 4
Joined: Tue Apr 21, 2009 12:21 am

Re: MFM Papago map feedback

Postby skylinestan » Tue Aug 25, 2009 12:09 am

Hi....need to contribute some errors on perak maps here....the Jalan canning estate to big road Jalan Raja Di hilir cannot be turning right...because the road has been change to one way,only can turning left...pls update thanx :wink:

User avatar
zamad
Valued Contributor
Posts: 2312
Joined: Sun Sep 21, 2008 12:50 am
Location: Shah Alam

Re: MFM Papago map feedback

Postby zamad » Tue Aug 25, 2009 5:19 am

hi skylinestan,

Would appreciate if you could give the coordinates of where this 'no right-turn' is, preferrably in gdb or gpx format. Look into our 'Library' on how to install/use Mapsource.

Cheers.
mfm : magnificent free maps
Garmin nüvi 2575RLM v2.80, Garmin 60CSx v4.00, Garmin nüvi 205W(patched), Papago R5800 X8.5, Qstarz Q1000P (Datalogger)
Retired: GMXT Palm T|X, nuvifone A10 v5.0.77, Garmin-Asus G60 v2.43, GPSlim236 (Datalogger)

skylinestan
Posts: 4
Joined: Tue Apr 21, 2009 12:21 am

Re: MFM Papago map feedback

Postby skylinestan » Tue Aug 25, 2009 9:11 am

Hi zamad this is the place that need to change on the map for papago :wink:
You do not have the required permissions to view the files attached to this post.

User avatar
zamad
Valued Contributor
Posts: 2312
Joined: Sun Sep 21, 2008 12:50 am
Location: Shah Alam

Re: MFM Papago map feedback

Postby zamad » Tue Aug 25, 2009 1:33 pm

Like this?
You do not have the required permissions to view the files attached to this post.
mfm : magnificent free maps
Garmin nüvi 2575RLM v2.80, Garmin 60CSx v4.00, Garmin nüvi 205W(patched), Papago R5800 X8.5, Qstarz Q1000P (Datalogger)
Retired: GMXT Palm T|X, nuvifone A10 v5.0.77, Garmin-Asus G60 v2.43, GPSlim236 (Datalogger)

Whiz In Ache
Posts: 6
Joined: Fri Jun 12, 2009 4:27 pm
Location: Singapore

Re: MFM Papago map feedback

Postby Whiz In Ache » Tue Aug 25, 2009 1:39 pm

antyong wrote:
Whiz In Ache wrote:Hihi, right now the English TTS speaks out all the hidden codes for the elevated ramps and stuff, even though they don't show on the map (eg AYE ramp will be announced as "AYE ramp cap 1 cap 0"). Will this be corrected? Thanks.

What device and Papago version are you using? If it is from the official distributors, the problem will be fixed.



I'm using the Holux 62 from EG with X3. The last few maps from MFM also had this problem.....TIA


Return to “MFM-Papago map/software feedback”

Who is online

Users browsing this forum: No registered users and 14 guests